HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

96 XPath OS CLI commands
Sets MP Router configuration parameters.
Synopsis
fcrconfigure
Availability
admin
Description
Use this command to interactively set the MP Router configuration parameter for this MP Router.
This command cannot be executed on an enabled system; you must first disable the system using the
switchDisable command.
Use this command to set the configuration parameter for this MP Router. The parameter is defined as
follows:
Operands
none
Examples
To configure the MP Router:
See also
switchDisable
switchEnable
fcrConfigure
Backbone fabric ID A fabric ID uniquely identifies a fabric in MP router
configurations. The backbone fabric is the fabric attached to the
U_Ports (such as E/F_Ports) of this MP Router. The backbone
fabric ID must be unique across all MP Router-connected fabrics.
switch:admin> fcrconfigure
FC Router parameter set. <cr> to skip a parameter
Backbone fabric ID: (1-128)[100]
You must run switchenable to return the switch back to online state.