HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

94 XPath OS CLI commands
Displays the status of an FCIP port.
Synopsis
fcipshow port [-r]
Availability
admin
Description
Use this command to display all configuration information and the current status for an FCIP port. In
addition, this command displays FCIP layer counters.
Operands
This command has the following operands:
Examples
To display information about FCIP port 8:
fcipShow
port Specifies the FCIP port (required)
-r Resets the counters (optional)
switch:admin> fcipshow 8
----------------- fcip protocol info(port 8) --------------------
Configured Current
State: UP UP
Local IP addr: 192.168.250.6 192.168.250.6
Remote IP addr: 0.0.0.0 0.0.0.0
Link Bandwidth: 1000 1000
Jumbo Support: enabled enabled
WAN_TOV timeout enabled enabled
Remote WWN: 00:00:00:00:00:00:00:00 00:00:00:00:00:00:00:00
Time sync state: synchronized (Since Tue Jul 13 17:48:27 2004)
in_frame_ip: 137378
in_frame_fc: 4008800
out_frame_ip: 4008800
out_frame_fc: 137378
in_octet_ip: 13007680
in_octet_fc: 8043998376
out_octet_ip: 8043998376
out_octet_fc: 806207
(continued on next page)