HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 87
Adds a Fabric Assist (FA) zone.
Synopsis
fazoneAdd “fazoneName“,“fazoneMemberList“
Availability
admin
Description
This command adds a member to an existing FA zone.
NOTE: This command changes the defined configuration (see cfgShow). For the change to become
effective, you must enable an appropriate zone configuration using the cfgEnable command.
For the change to be preserved across MP Router reboots, save it to nonvolatile memory using the
cfgSave command.
Operands
The following operands are required:
Examples
To add aliases for some disk arrays to the Fabric Assist zone, Blue_fazone:
To add a Fabric Assist host member to Fabric Assist zone, Blue_fazone:
fazoneAdd
“fazoneName“ Specifies the name for the Fabric Assist zone, enclosed in
quotation marks.
“fazoneMemberList“ Specifies a list of Fabric Assist Zone members, enclosed in
quotation marks, with each member separated by a semicolon.
A member can be specified by one or more of the following
methods:
• Enter a fabric domain and area number pair. View the
area numbers for ports using the switchShow command.
• WWN
• Fabric Assist zone alias name
switch:admin> fazoneAdd “Blue_fazone”, “array3; array4; array5”
switch:admin> fazoneAdd “Blue_fazone”, “H{5,6}”