HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 77
Displays or sets the severity level for a predefined event.
Synopsis
eventseverity eventId severityLevel
Availability
admin
Description
Use this command to display or set the severity level for a predefined event.
Operands
The following operands are required:
Examples
To display the event severity level for event ID 6:
To change the event severity level to error for event ID 6:
See also
eventActionSet
eventSeverityShow
eventShow
eventSeverity
eventId Event identification number
severityLevel The available severity levels are:
panic Indicates a failure that causes the MP Router to
malfunction.
critical Indicates a failure that affects data traffic among
ports.
error Indicates a failure that affects data traffic on a single
port.
warning Indicates a temporary failure that does not affect data
traffic.
info Indicates an informational event.
debug Indicates an event for debugging purposes.
switch:admin> eventseverity 6
Event severity for event ID 6 is: info
switch:admin> eventseverity 6 error
Event severity for event ID 6 sets to: error