Manualshelf

HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks Multiprotocol Base 8-port Router
41424344454647484950
XPath OS 7.4.x command reference guide 43
Sets system parameters to factory defaults.
Synopsis
configdefault
Availability
admin
Description
Use this command to set all system parameters, except the following, to their factory defaults:
• Ethernet MAC address
• IP address of the management interfaces
• Subnet mask of the management interfaces
• IP gateway address of the management interfaces
• License keys
• World wide names (WWNs)
• Zoning configuration
• User accounts and passwords
• SNMP configurations
Because some configurations are cached by the system, a reboot is forced after this command.
Operands
none
Examples
To set system parameters to their defaults:
See also
configDownload
configUpload
configDefault
switch:admin> configdefault
configdefault requires a switch reboot, do you want to proceed? (y, n) y
Configuration restored to factory default
<switch then enters into reboot stage......>