HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 261
Displays unicast routing information.
Synopsis
urouteshow [in-port [domain]]
Availability
all users
Description
Use this command to display the unicast routing information for a port as it is known by the Fibre Channel
Shortest Path First (FSPF) path selection/routing task. The routing information describes how a frame that is
received from a port on the local MP Router is routed to reach a destination switch.
The command displays the routing information for all the active ports on the local MP Router to all the
domains in the fabric.
The following fields are displayed:
The information provided by this command should match what is provided by portRouteInfo and
topologyShow.
Operands
This command has the following optional operands:
urouteShow
Local Domain ID The domain number of the local MP Router.
In-Port The port from which a frame comes.
Domain The destination domain of the incoming frame.
Out-Port The port to which an incoming frame is forwarded to reach the
destination domain.
Metric The cost of reaching the destination domain.
Hops The maximum number of hops required to reach the destination
domain.
Flags Whether this route is dynamic (D) or static (S). A dynamic
route is discovered automatically by the FSPF path-selection
protocol. A static route is assigned using the urouteConfig
command.
Next (Dom, Port) Domain and port number of the next hop. These are the domain
number and the port number of the switch to which Out-Port
is connected.
in-port Displays the routing information for the port from which a frame
comes to all domains in the fabric.
in-port domain Displays the routing information for the port from which a frame
comes to the destination domain.