HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

260 XPath OS CLI commands
Removes a static route.
Synopsis
urouteremove in-port domain
Availability
admin
Description
Use this command to remove a previously configured static route.
After this command is entered, the route to domain for in-port might or might not change. It will
change if the previous static route was not along a minimum-cost path.
After this command is entered, the load sharing to domain is revaluated.
Operands
This command has the following required operands:
Examples
To remove a static route:
See also
configShow
portRouteInfo
urouteConfig
urouteShow
urouteRemove
in-port The port to be statically routed.
domain The destination domain.
switch:admin> urouteremove 3 71
Committing configuration...done