HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

256 XPath OS CLI commands
Displays or sets the network time synchronization (NTP) server address.
Synopsis
tsclockserver [ipaddr]
Availability
admin
Description
This command displays or sets the NTP server address. It synchronizes the local time of the MP Router to
an external NTP server. If no operand is specified, the current value is displayed.
Operands
This command has the following optional operand:
Examples
To set the NTP server to the specified IP address:
To disable the NTP service:
See also
date
tsClockServer
ipaddr Specifies the IP address of the NTP server. This option enables
the MP Router to synchronize with the specified external NTP
server. The NTP server should be accessible from the MP Router.
The default ipaddr value is LOCL. When a clock server IP
address other than LOCL is specified, the date command will
be restricted to display mode only.
switch:admin> tsclockserver 192.168.126.60
tsclockserver is set
switch:admin> tsclockserver LOCL
tsclockserver is set