HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

246 XPath OS CLI commands
Displays or sets the IDLE timeout value for a login session.
Synopsis
timeout [timeVal]
Availability
admin
Description
Use this command without an operand to display the current IDLE timeout for the login session.
Operands
This command has the following optional operand:
Examples
To set the idle timeout to 10 minutes:
See also
none
timeout
timeVal Sets the IDLE timeout value to number of minutes. Using a
timeout value of 0 disables the timeout functionality; login
sessions would never be disconnected. The maximum value that
can be specified is 99,999; the default is 10 minutes.
switch:admin> timeout 10
IDLE Timeout Changed to 10 minutes
The modified IDLE Timeout will be in effect after NEXT login.