HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

238 XPath OS CLI commands
Displays MP Router and port status.
Synopsis
switchshow
Availability
all users
Description
Use this command to display MP Router and port status information. This command displays the following
fields:
The MP Router summary is followed by one line per port, as follows:
switchShow
Switch Name The symbolic name
Switch State The MP Router state: online or offline
Switch Type The MP Router model an revision numbers
Switch Role The MP Router role: principal or subordinate
Switch Domain The MP Router Domain ID: 1 to 239
Switch ID The MP Router embedded port D_ID
Switch WWN The MP Router world wide name
beacon status The MP Router beacon status
zoning The MP Router zoning status
MP Router BB Fabric
ID
The backbone fabric ID for FC routing
Port The port number
Media -- No module present
id Serial ID
Speed 1G 1 Gb/s
2G 2 Gb/s
N1 1 Gb/s negotiation
N2 2 Gb/s negotiation
AN Autonegotiation
State No_Module No module present (SFP or other)
No_Light The module is not receiving light
Online The port is up and running
Info The Info field can be blank or display the
following:
E_Port Fabric port
F_Port Point-to-point
FL_Port Loop port
EX_Port EX_Port
VE_Port FCIP port
disabled Port is disabled
loopback Port is in loopback mode