HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

236 XPath OS CLI commands

Enables the whole MP Router.

Synopsis

switchenable [-f]

Availability

admin

Description

Use this command to allow ports to be enabled. If an MP Router is disabled, all its ports are disabled.

However, if an MP Router is enabled, any individual port can still be disabled by a portDisable

command.

If a switchEnable command is in progress, you cannot issue a switchDisable command or another

switchEnable command. If the previously issued command never completes, use the -f operand. The

MP Router ignores the state of the previously issued command and attempts to perform the operation as

well as possible.

Operands

The following operand is optional:

Examples

To enable the MP Router: