HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

232 XPath OS CLI commands
Runs the CLI scripts for debugging.
Synopsis
supportshow
Availability
admin
Description
Use this command to run CLI scripts, which are generally used for debugging. Commands include the
following:
The output from the scripts is displayed on the screen. The display can also be saved in a file with an
extension of .log or .txt.
Examples
To display the output on the screen:
To save the output to a log file:
See also
diagUpload
supportShow
chassisShow fcrProxyDevShow portCfgShow
cfgActvShow -d fcrResourceShow portLogDump
cfgShow fcrRouteShow portRouteInfo
configShow fcrXlateConfig portShow 0-15
date figeroShow portStatsShow 0-15
du fspfShow ps-axl
dlsShow ifConfig -a psShow
errShow -a interfaceShow routeShow
eventShow iodShow sfpShow
eventShowByNum 1 -1 -a ipaddrShow shpShow 1-15
fabLogShow licenseShow slotShow
fabricShow lsanZoneShow switchShow
fazoneAdd lsdbShow tempShow
fcipShow 0-15 nbrStateShow top -d 1
fcrDbgDevShow nsAllShow -v topologyShow
fcrFabricShow nslogShow uname
fcrLogShow nsShow upTime
fcrPhyDevShow portCfgEXPort 0-15 urouteShow
fcrProxyConfig portCfgFcip $I zslogShow
switch:admin> supportshow
switch:admin> supportshow > logfile.txt