HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 223
Sets the fan speed for all fans.
Synopsis
setfanspeed [0|1]
Availability
admin
Description
Use this command to set the speed of all fans to one of two speeds. If a temperature sensor exceeds the
warning threshold, this command fails because the system automatically sets the fan speed to HIGH.
Operands
This command has the following operands:
Examples
To set the fan speed:
See also
fanShow
setFanSpeed
0 Sets the speed for all fans to NORMAL.
1 Sets the speed for all fans to HIGH.
switch:admin> setfanspeed 1
Fan speed is set to HIGH