HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

192 XPath OS CLI commands
Displays port activity logs.
Synopsis
portlogshow [-c count] [port_num]
Availability
admin
Description
Use this command to display port logs, paginated. The portLogShow command is similar to
portLogDump, which does not paginate the output.
A port log internally stores entries for each port as a circular buffer. Each port has space to store 2048 log
entries. If a port log is disabled, an error message is displayed. The actual message varies, depending on
the way in which the command is entered, as follows:
• If the command is entered using a range for port_num:
WARNING: Port log is disabled for port(s)
• If the command is entered without operands:
WARNING: Port log is disabled for all ports
• If the command is entered with port_num specified:
WARNING: Port log is disabled for this port
The following fields are displayed:
portLogShow
Time Date and time of the event.
Module Name of the module that logged the event.
Event Possible events include:
PrtDis Port disabled.
PrtEnab Port enabled.
PrtStart Port start.
PrtStop Port stop.
PrtSCN Port state change.
IOCTL IOCTL execution context.
Tx Frame transmitted.
Tx_Ack1 ACK_1 transmitted.
Rx Frame received.
Rx_LC Received a link control frame.
Rx_Ack1 Received ACK_1.
Ct_in Received a CT-based request.
Ct_out Transmitted a CT-based response.
nbr_sm FSPF’s neighbor state machine state
transition.
RSCN RSCN transmitted.
SWRSCN Switch RSCN transmitted.
Debug Debug information.