HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 191
Enables port logs.
Synopsis
portlogenable [port_num]
Availability
admin
Description
Use this command to enable port logs. If no parameter is specified, all port logs are enabled. If
port_num is specified, only the port log for the specified ports are enabled.
NOTE: By default, the port logs are enabled.
Operands
The following operand is optional:
Examples
To enable the port log for port 9:
To enable all port logs:
See also
portLogClear
portLogDisable
portLogDump
portLogShow
upTime
portLogEnable
port_num Only the specified port log is enabled. Valid port numbers are:
0–15 External ports
16 Bridge port (an internal port)
17 Central processor (CP)
switch:admin> portlogenable 9
portlog of port 9 enabled
switch:admin> portlogenable
All portlogs enabled