HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

188 XPath OS CLI commands
Displays port logs, without page breaks.
Synopsis
portlogdump [-c count] [port_num]
Availability
admin
Description
Use this command to display all entries in the port log, without page breaks. The portLogDump
command is similar to the portLogShow command, which paginates the output. If the port log is
disabled, an error message is displayed. The actual message varies, depending on the way in which the
command is entered, as follows:
• If the command is entered with port_num specified, the message is:
WARNING: Port log is disabled for this port
• If the command is entered using a range for port_num, the message is:
WARNING: Port log is disabled for port(s)
• If the command is entered without operands, the message is:
WARNING: Port log is disabled for all ports
See portLogShow for a description of port logs.
The following fields are displayed:
portLogDump
Time Date and time of the event.
Module Name of the module that logged the event.
Event Possible events include:
PrtDis Port disabled.
PrtEnab Port enabled.
PrtStart Port start.
PrtStop Port stop.
PrtSCN Port state change.
IOCTL IOCTL execution context.
Tx Frame transmitted.
Tx_Ack1 ACK_1 transmitted.
Rx Frame received.
Rx_LC Received a link control frame.
Rx_Ack1 Received ACK_1.
Ct_in Received a CT-based request.
Ct_out Transmitted a CT-based response.
nbr_sm FSPF’s neighbor state machine state
transition.
RSCN RSCN transmitted.
SWRSCN Switch RSCN transmitted.