HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

184 XPath OS CLI commands
Displays a port error summary.
Synopsis
porterrshow
Availability
all users
Description
Use this command to display an error summary for all ports. One output line is displayed per port; error
counters are displayed in ones, thousands (the number is followed by k), millions (the number is followed
by m), or billions (the number is followed by g.) For Ethernet ports, some counters display NA, if the
counters are not applicable.
The display includes:
portErrShow
port type FC for Fibre Channel; GE for Gigabit Ethernet
frames tx Frames transmitted
frames rx Frames received
enc in Encoding errors inside of frames
crc err Frames with CRC errors
too shrt Frames that are too short
too long Frames that are too long
bad eof Frames with bad end-of-frame delimiters
enc out Encoding error outside of frames
disc c3 Class 3 frames discarded
link fail Link failures (LF1 or LF2 states)
loss sync Loss of synchronization
loss sig Loss of signal
frjt Frames rejected with F_RJT
fbsy Frames busied with F_BSY