HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 183
Enables a port.
Synopsis
portenable port
Availability
admin
Description
Use this command to enable a port. This command starts the port laser, unlike the portStart command,
which loads the port code.
Operands
This command has the following required operand:
Examples
To enable port 3:
To enable ports 3 through 6:
See also
portDisable
portShow
portStart
portStop
portType
switchShow
portEnable
port Specifies the port.
switch:admin> portenable 3
port 3 enabled
switch:admin> portenable 3-6
port 3 enabled
port 4 enabled
port 5 enabled
port 6 enabled