HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

182 XPath OS CLI commands
Disables a port.
Synopsis
portdisable port
Availability
admin
Description
Use this command to disable a port. You can use this command to quickly disable or stop the laser on the
port when troubleshooting a connected device. However, use the portStop command to stop the code to
a port for more involved troubleshooting or for reconfiguring the port to Fibre Channel or IP.
Operands
This command has the following required operand:
Examples
To disable port 3:
To disable ports 3 through 6:
See also
portEnable
portShow
portStart
portStop
portType
switchShow
portDisable
port Specifies the port.
switch:admin> portdisable 3
port 3 disabled
switch:admin> portdisable 3-6
port 3 disabled
port 4 disabled
port 5 disabled
port 6 disabled