HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 177
Displays or sets the configured port topology.
Synopsis
portcfgtopology port [topology]
Availability
admin
Description
Use this command to display or set the configured Fibre Channel port topology. If the topology
parameter is specified, the command sets the port to the specified new topology. If no parameter is
specified, the command displays the currently configured port topology.
If the port is configured as an E_Port or EX_Port, the topology is implicitly changed to point-to-point.
Operands
This command has the following required operand:
This command has the following optional operand:
Examples
To set the topology of port 1 to point-to-point:
portCfgTopology
port Specifies the port.
topology Specifies the topology. The value of topology can be:
p Point-to-point
switch:admin> portcfgtopology 1 p
port 1 topology set to: P-P