HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

168 XPath OS CLI commands
Examples
To display the EX_Port configuration of port 0:
To set the fabric ID of port 1 to 5 and the PID format to core:
To configure port 0 to be an EX_Port and set the fabric ID to 4:
To disable auto-ELP on port 0 of an EX_Port:
See also
portCfgSpeed
portDisable
portEnable
portShow
portStart
portStop
portType
secAuthSecret
switch:admin> portcfgexport 0
Admin: enabled
State: OK
Pid format: core
Operate mode: Brocade Native
Edge Fabric ID: 4
Front Domain ID: 160
Principal Switch: 5
Principal WWN: 10:00:00:05:1e:34:11:e5
Front domain WWN: 50:00:51:e1:62:0a:de:00
Fabric Parameters: Auto Negotiate
R_A_TOV: 10000(N)
E_D_TOV: 2000(N)
Authentication Type: None
DH Group: N/A
Hash Algorithm: N/A
Edge fabric's primary WWN: N/A
Edge fabric's version stamp: N/A
switch:admin> portcfgexport 1 -f 5 -p 1
switch:admin> portcfgexport 0 -a 1 -f 4
switch:admin> portcfgexport 0 -t 2