HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 165
Displays or sets the port to E_Port mode.
Synopsis
portcfgeport port [1 | 0]
Availability
admin
Description
Use this command either to set the port to E_Port mode or to prevent setting the port to E_Port mode. If no
parameter is given, the command displays the current mode. If the parameter is given, it enables or
disables E_Port mode.
Operands
This command has the following operands:
Examples
To display the configured E_Port mode of port 3:
To enable E_Port mode for port 2:
To display the configured E_Port mode of ports 3 through 5:
See also
linkCost
portCfgSpeed
portCfgTopology
portDisable
portEnable
portShow
portType
portCfgEPort
port Identifies the port
E_Port mode parameters:
1 Enable
2 Disable
switch:admin> portcfgeport 3
port 3 E_Port mode is: ENABLED
switch:admin> portcfgeport 2 1
port 2 E_Port mode is: ENABLED
switch:admin> portcfgeport 3-5
port 3 E_Port mode is: ENABLED
port 4 E_port mode is: ENABLED
port 5 E_Port mode is: ENABLED