HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

164 XPath OS CLI commands

Restore the port configuration to the defaults.

Synopsis

portcfgdefault port

Availability

admin

Description

Use this command to reset any special configuration values on a port to their factory defaults. The default

configuration of the port takes effect using the portStart or reboot commands. After running the

portCfgDefault command, you need to enable the port using the portEnable command, because the

port is disabled by default.

Operands

This command has the following operand:

Examples

To set port 7 to factory defaults:

To set ports 14 and 15 to factory defaults: