HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

150 XPath OS CLI commands
Displays the FSPF state of the neighbor.
Synopsis
nbrstateshow [port]
Availability
all users
Description
Use this command to display a synopsis of all the neighbors of the local MP Router or of a specific
neighbor if a parameter is supplied.
A neighbor is a switch or another MP Router that is attached directly to the local MP Router.
The following fields are displayed:
Operands
This command has the following optional operand:
Examples
To display the neighbor state of all E_Ports:
nbrStateShow
Local Domain Id The domain number of the local MP Router.
Local Port The E_Port (interface) on the local MP Router.
Domain The domain number of the remote MP Router or switch.
Remote Port The E_Port (interface) on the remote MP Router or switch.
state The state of the neighbor. The E_Port is used to route frames only if the
neighbor is in NB_ST_FULL state.
Other possible neighbor states are:
NB_ST_DOWN Neighbor state machine is down.
NB_ST_INIT In Init state. Waiting for two-way hello from the neighbor.
NB_ST_DB_XCHG In Database Exchange state. Link state record database exchange in
progress.
NB_ST_DB_ACK_WAIT In Database Acknowledge wait state. Waiting for an acknowledgement for
the link state record database that was sent from the local MP Router. The
neighbor’s database was received already.
NB_ST_DB_WAIT In Database Wait state. Local link state database was acknowledged by the
neighbor. Waiting for the database from the neighbor.
port The port on the local MP Router that connects to the neighbor
whose FSFP state is to be displayed.
switch:admin> nbrstateshow
Local Domain Id: 100
Local-Port Domain Remote-Port state
3 1 14 NB_ST_FULL
4 1 13 NB_ST_FULL
10 1 12 NB_ST_FULL
15 4 4 NB_ST_FULL