HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

148 XPath OS CLI commands
Displays the FSPF Link State Database.
Synopsis
lsdbshow [domain_number]
Availability
all users
Description
Use this command to display a Link State Database Record for either one or all the MP Routers or switches
in the fabric.
The MP Router connects to the fabric when two data structures are involved: the Link State Database Entry
and a Link State Record (LSR). The LSR for domain n describes all the links that the MP Router with domain
number n has with all its neighbor routers or switches. For a link to be reported in the LSR, the neighbor for
that link must be the NB_ST_FULL state.
This command displays the content of both data structures, if the LSR is present, as follows:
Operands
The following operand is optional:
lsdbShow
Domain The domain number described by this LSR.
Timers Running Number of timers running.
flags Internal variable.
numLSAsPending Number of link state acknowledgements pending.
floodlist The ports on which the LSAs are expected.
Link Record type Switch Link Record or AR Summary Record type.
Age of this record
in seconds
The age, in seconds, of this LSR. An LSR is removed from the
database when its age exceeds 3,600 seconds.
Domain id of switch
owning this record
Domain id of the
switch advertising
the LSR
LSIncarnationNum The incarnation number of this LSR.
checksum The checksum of the whole LSR, except the lsAge field.
LSRLength The total length (in bytes) of this LSR. The length includes the
header and the link state information for all the links.
Num Links The number of links to the domain.
LinkId The ID of this link. The ID is the domain number of the MP Router
or switch on the other side of the link.
out port The port number on the local MP Router.
rem port The port number of the port on the other side of the link.
cost The actual cost of this link.
domain_number The domain number of the LSR to display.