HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

146 XPath OS CLI commands
Displays LSAN zone information.
Synopsis
lsanzoneshow [-s ] [-f fabricID] [-w wwn] [-z zonename]
Availability
all users
Description
This command displays the LSAN zones. The LSAN zones are normal WWN zones created in MP Router
EX_Port-connected edge fabrics. The LSAN zones are identified by the case-insensitive text string “LSAN_”
in the zone name and contain only port WWNs. The MP Router uses these zones to establish the
interfabric device sharing policy. The LSAN zones are established by zoning administration in each
EX_Port-attached edge fabric. Interfabric device sharing is allowed between two or more devices if the
LSAN zones defined in their respective edge fabrics both allow the two devices to communicate (such that
the intersection of LSAN zones in two edge fabrics define the interfabric device sharing policy).
The LSAN zones are listed by fabric. LSAN zone membership information (information about the devices in
the LSAN zone) is provided for each LSAN zone. The default output displays only port world wide names
of the LSAN zone members.
The message No LSAN zone found is displayed if there is no LSAN zone information available at this
MP Router.
Each LSAN zone entry displays the following output:
Operands
This command has the following optional operands:
lsanZoneShow
Fabric ID The fabric on which the LSAN zone has been created.
Zone Name The zone name.
A list of zone members The zone members or devices. The default output displays the
WWN of the zone members.
-s Displays state information for the device. Valid states include:
Exist Device exists in this fabric (the fabric of the
LSAN zone entry).
Imported Device has been imported (proxy created) into
this fabric.
Configured Device is configured to be in an LSAN, but the
device is not imported and does not exist in this
fabric.
-f fabricID Specifies a search parameter that returns LSAN zones for the
specified fabric.
-w wwn Specifies a search parameter that displays LSAN zones containing
the specified port WWN.
-z zonename Specifies a search parameter that displays LSAN zones with the
specified zone name.