HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

124 XPath OS CLI commands
Operands
The following operand is optional:
Examples
To display FSPF interface information for port 1:
No. of commands accepted The total number of commands accepted from the neighbor
MP Router or switch. It includes Hellos, Link State Updates (LSUs),
and Link State Acknowledgements (LSAs).
No. of invalid cmds
received
The number of invalid commands received from the neighbor MP
Router or switch. Typically, these are commands with an FSPF
version number later than the one running on the local MP Router
or switch.
No. of hello received The number of Hello frames received from the neighbor MP Router
or switch.
No. of LSUs received The number of LSUs received from the neighbor MP Router or
switch.
No. of LSAs received The number of LSAs received from the neighbor MP Router or
switch.
No. of Hellos xmit
attempted
The number of attempted transmissions of Hello frames to the
neighbor MP Router or switch.
No. of Hellos
transmitted
The number of Hello frames transmitted to the neighbor MP Router
or switch.
No. of LSUs transmit
attempted
The number of attempted transmissions of LSUs to the neighbor MP
Router or switch.
No. of LSUs transmitted The number of LSUs transmitted to the neighbor MP Router or
switch.
No. of LSAs transmit
attempted
The number of attempted transmissions of LSAs to the neighbor MP
Router or switch.
No. of LSAs transmitted The number of LSAs transmitted to the neighbor MP Router or
switch.
port Specifies the port number.
switch:admin> interfaceshow 1
Interface 1 data structure:
LocalPortId = 1
defaultCost = 500
cost = 500
delay = 1
upCount = 1
lastUpTime = Tue Jul 6 17:28:51 UTC 2004
downCount = 0
lastDownTime = 0
(continued on next page)