HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

12 XPath OS CLI commands
Configures Simple Network Management Protocol (SNMP) agent system parameters and
trap recipient.
Synopsis
agtcfgset
Availability
admin
Description
Use this command to set the sysDescr, sysLocation, and sysContact parameters of the MIB-II
system group. All these parameters accept letters, digits, spaces, underscores, hyphens, and percent and
dollar signs, with a maximum length of 255 characters.
This command also configures the sweventTrapLevel. Only events that have a severity of
swEventTrapLevel or higher generate a trap. Possible levels include:
0Panic
1Critical
2Error
3 Warning
4Info
5Debug
This command allows a maximum of 10 trap recipients. Each trap recipient is composed of a community
string and an IP address. The order of the trap recipients has no meaning; traps are sent to all configured
recipients. The community string has the same syntax as other system parameters.
Operands
none
agtCfgSet