HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

110 XPath OS CLI commands
Displays or persistently configures a translate (xlate) domain’s domain ID.
Synopsis
fcrxlateconfig [-r remove] edge FabricIdremote FabricIdpreferred DomainId
Availability
admin
Description
Use this command to display a translate domain’s domain ID or change the preferred domain ID.
A translate domain is a phantom domain created by a Fibre Channel (FC) router. FC routers emulate
proxy devices representing real devices in remote fabrics. These proxy devices are emulated to be
connected to translate domains. Translate domains are presented to a fabric as residing topologically
behind front phantom domains (domains created by an EX_Port). In every EX_Port-attached edge fabric,
there can be a translate domain for every MP Router-accessible remote fabric.
During a fabric build, the translate domain requests a domain ID from the principal MP Router in the
EX_Port-attached edge fabric. The domain ID requested is the preferred domain ID. The preferred domain
ID can be set by a user when the translate domain is not active and is persistently saved. The principal MP
Router attempts to provide the translate domain with the requested domain ID but might not provide it if
there are domain ID conflicts with other domains in the fabric. If the requested domain ID (for example, the
preferred domain ID) is unavailable, the domain ID assignment is completely at the discretion of the
principal MP Router. The assigned domain ID is persistently stored and is used as the preferred domain ID
in the future.
Operands
This command had the following operands:
Examples
To display the translate domain configuration:
fcrXlateConfig
-r remove Removes the configured domain ID (clears configured
domain ID). The translate domain must be inactive to remove
the preferred domain ID.
edgeFabricId Specifies the fabric ID of the fabric that contains the translate
domain. Valid values are 1 to 128.
remoteFabricId Specifies the fabric ID of the remote fabric represented by this
translate domain. Valid values are 1 to 128.
preferredDomainId Specifies the preferred domain ID of the translate phantom.
Valid values are 1 to 239.
fcr:admin> fcrxlateconfig
EdgeFid RemoteFid Domain OwnerDid XlateWWN
002 003 001 N/A N/A
004 005 002 009 50:00:51:e1:30:30:0f:05
005 004 003 015 50:00:51:e1:30:30:0f:04