HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 101
Displays and configures proxy devices presented by an MP Router.
Synopsis
fcrproxyconfig [-s slot [importedFID devWWN slot]] [-r remove [importedFID
devWWN]]
Availability
admin
Description
Use this command to display or set the persistent configuration of proxy devices presented by the local MP
Router.
If no optional parameter is given, the command displays the persistent proxy device configuration;
otherwise, it sets the specified attributes to their new values.
The proxy device must be inactive prior to setting or clearing persistent attributes. Disabling EX_Ports (for
example, using the portDisable command) attached to the relevant edge fabric, removing the device
from the appropriate LSAN zones, or disabling the physical device are valid methods of ensuring a proxy
device is inactive.
Persistent proxy device configuration attributes apply to the local MP Router. Multiple MP Routers attached
to the same edge fabric coordinate to present the same proxy devices. As a result, persistent proxy device
configurations must be consistent across all MP Routers attached to the same edge fabric or results are
unpredictable. If the persistent proxy device configuration is not altered by the administrator, no action is
required. If the configuration is altered, then care must be taken to ensure consistency across all MP
Routers attached to the same edge fabric.
The following information is displayed if no optional parameter is given:
fcrProxyConfig
Edge FID The imported fabric ID of the proxy device.
Device WWN The port World Wide Name of the device.
Slot The slot used for the device WWN.
The device WWN-to-slot association is persistently stored. The
slot format is XXYYH, where XX specifies the translate domain
port number and YY specifies the AL_PA value or the low 8 bits
of the port ID of the proxy device (valid values include 01H to
FFH). The port ID of the proxy device is derived from the PID
format (for example, native, core, and extended edge) and the
proxy device slot.
The message All slots empty is returned if no proxy device
WWN is stored in any slot for all edge fabrics.