HP StorageWorks XPath OS 7.4.X Administrator Guide (AA-RVHDD-TE, February 2006)

XPath OS 7.4.x administrator guide 65
Figure 8 SAN Pilot and EFCM zones
4. Enter the desired name in the Zone Name box using the LSAN_xxxx naming schema.
• In EFCM, move to the list of ports and nodes, and highlight the devices to include in the LSAN.
•In SAN Pilot, click Add New Zone and then select the new zone to display the Modify Zone tab (see
Figure 9). Add the desired devices to the zone.
Figure 9 Modify Zone tab
5. To add devices that are connected to the HP fabric, enter the WWN into the World Wide Name field
and then click Add Member (see Figure 10).
SAN Pilot EFCM