HP StorageWorks XPath OS 7.4.X Administrator Guide (AA-RVHDD-TE, February 2006)

30 Performing basic configuration
2. Issue the topologyShow command:
The following information is displayed:
• Domain: The destination domain of incoming frame.
• Metric: The cost of reaching destination domain.
• Hops: The maximum number of hops to reach destination domain.
• Out Port: The available ports to which the incoming frame may be forwarded to reach the
destination domain.
• Name: The switch name associated with the destination domain ID.
Viewing unicast routing information
1. Log in as admin.
2. Issue the urouteShow command:
:
The unicast routing information describes how a frame received from a port on the local switch is routed
to reach a destination switch. The following information is displayed:
• Local Domain ID: The domain number of the local switch.
• In-Port: The port from which a frame comes in.
• Domain: The destination domain of the incoming frame.
• Out-Port: The port to which an incoming frame is forwarded to reach the destination domain.
• Metric: The cost of reaching the destination domain.
• Hops: The maximum number of hops required to reach the destination domain.
• Flags: Whether this route is dynamic (D) or static (S). A dynamic route is discovered by the FSPF
path-selection routing task. A static route is assigned using the urouteConfig command.
router:admin> topologyshow
8 domains in the fabric; Local Domain ID: 100
Domain Metric Hops Out Port Name
-----------------------------------------------------
1 500 1 9 "switch154"
2 1250 2 5 "switch101"
8
3 500 1 5 "switch252"
8
4 1250 2 5 "switch165"
8
25 1250 2 5 "msit_ref_term"
8
210 2750 4 5 "switch210"
8
211 2250 3 5 "switch211"
8
router:admin>
router:admin> urouteshow
Local Domain ID: 100
In-Port Domain Out-Port Metric Hops Flags Next(Dom,Port)
0 74 10 1500 2 D 103,10
75 0 500 1 D 75,0
103 10 1000 1 D 103,10
10 74 10 1500 2 D 103,10
75 0 500 1 D 75,0
103 10 1000 1 D 103,10