HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (AV-RU6YD-TE, September 2004)

8 SAN Switch Rack Mount Kit Installation Instructions
To install the HP StorageWorks device in a rack:
1. Check the contents of the shipping carton to verify that all the required parts
and hardware are available.
2. Choose a mounting location in the rack.
3. Attach the rear mounting brackets to the rear rack uprights by completing one
of the following steps:
— For an HP 10,000 Series rack, assemble each of the two brackets with two
#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers
and two #10 adapter washers as shown in Figure 1.
Figure 1: Installing the Rear Mounting Brackets (HP 10,000 Series Rack)