HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (AV-RU6YD-TE, September 2004)

3SAN Switch Rack Mount Kit Installation Instructions

About this Document

This document describes how to use the optional SAN Switch Rack Mount Kit to

install the following HP StorageWorks Storage Area Network (SAN) devices:

■ Multi-protocol (MP) Router

■ SAN Switch 2/8V

■ SAN Switch 2/16, SAN Switch 2/16V or SAN Switch 2/16N

■ SAN Switch 2/32

Note: The HP StorageWorks SAN Switch Rack Mount Kit is for use with the HP 9000

Series, HP 10,000 Series, and HP System/e racks only.

This section describes the content reflected in this document, including:

■ Intended Audience, page 3

■ Related Documentation, page 3

■ Rack Stability, page 4

■ Installation and Safety Guidelines, page 5

■ Using the SAN Switch Rack Mount Kit to Install an HP StorageWorks

Device, page 6

Intended Audience

This book is intended for use by system administrators who are experienced with:

■ Setting up devices in a SAN

■ HP StorageWorks Fibre Channel SAN switches and routers