HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (AV-RU6YD-TE, September 2004)

15SAN Switch Rack Mount Kit Installation Instructions
Note: For factory integration only, tighten the #8-32 x 3/16-inch Phillips pan-head
screw with thread lock and torque between 6 to 8 inch-pounds.
8. Verify that a plenum is installed on the SAN Switch 2/8V, SAN Switch 2/16,
SAN Switch 2/16V or SAN Switch 2/16N models only, as shown in Figure 8.
The plenum is an overlay that dissipates the heat generated by the switch, and
is necessary to prevent overheating.
Figure 8: Attaching the Inner Rails on a SAN Switch 2/8V with Plenum
The components in Figure 8 include:
9. Contact your authorized HP switch reseller for information if a plenum is not
preinstalled on your SAN Switch 2/8V, SAN Switch 2/16, SAN Switch 2/16V
or SAN Switch 2/16N model only.
1
Plenum
2
Switch Chassis
0013a
2
1