HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (AV-RU6YD-TE, September 2004)

11SAN Switch Rack Mount Kit Installation Instructions
b. Depending on the rack you are using, complete one of the following tasks:
— For an HP 10,000 Series rack, install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10 adapter
washers in the upper and lower hole locations of the right rail. Then install
two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock
washers and two #10 adapter washers in the upper and lower hole
locations of the left rail, as shown in Figure 4.
Figure 4: Assembling the Outer Rails (HP 10,000 Series Rack)