HP StorageWorks Fabric OS 5.2.x administrator guide (5697-0014, November 2009)

230 Using the FC-FC routing service
The following example sets port 10/12 to admin-enabled, assigns a Fabric ID of 41 and sets the port to
Core PID and to Brocade mode. For complete information about any Fabric OS command, see
”Configuring interoperability mode” on page 399.
5. Re-enable the port by issuing the portEnable command.
6. Still on the 400 MP Router and B-Series MP Router (FR4-18i) blade, use portDisable to disable the
EX_Port that you will use to connect to the McDATA switch Ports are persistently disabled by default.
7. Issue the portCfgExPort command to configure the port as an EX_Port with a different FID within the
McDATA fabric PID mode.
This port can now connect to a McDATA switch in McDATA Fabric mode or McDATA Open mode.
The following example sets port 10/13 to admin-enabled, assigns a Fabric ID of 37, and sets the
switch:admin_06> portcfgexport 10/12 -a 1 -f 41 -p 1 -m 0
Switch:admin_06> portenable 10/12
Switch:admin_06> portdisable 10/13
Switch:admin_06> switchshow
switchName: b48000_5x_1/PORT/P
switchType: 42.2
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 3
switchId: fffc03
switchWwn: 10:00:00:60:69:e4:00:86
zoning: ON (test)
switchBeacon: OFF
blade3 Beacon: OFF
blade8 Beacon: OFF
blade10 Beacon: OFF
FC Router: ON
FC Router BB Fabric ID: 1
Index Slot Port Address Media Speed State Proto
===================================================
112 10 0 037000 id N4 No_Light Disabled (Persistent)
113 10 1 037100 id N4 No_Light Disabled (Persistent)
114 10 2 037200 id N4 No_Light Disabled (Persistent)
115 10 3 037300 id N4 No_Light Disabled (Persistent)
116 10 4 037400 id N4 No_Light Disabled (Persistent)
117 10 5 037500 id N4 No_Light Disabled (Persistent)
118 10 6 037600 id N4 No_Light Disabled (Persistent)
119 10 7 037700 id N4 No_Light Disabled (Persistent)
120 10 8 037800 id N4 No_Sync Disabled (Persistent)
121 10 9 037900 id N2 No_Light
122 10 10 037a00 id N2 No_Light
123 10 11 037b00 id N2 No_Light
124 10 12 037c00 id N2 Online EX-Port 10:00:00:05:1e:34:e0:6a
"b4100_5x_1"(fabric id = 41 )
125 10 13 037d00 id N2 In_Sync Disabled
126 10 14 037e00 id N2 No_Light
127 10 15 037f00 id N2 No_Light
240 10 16 03f000 -- -- Offline Disabled (Persistent)
241 10 17 03f100 -- -- Offline Disabled (Persistent)
242 10 18 03f200 -- -- Offline Disabled (Persistent)
243 10 19 03f300 -- -- Offline Disabled (Persistent)
...this example has been truncated