HP StorageWorks Fabric OS 5.2.x administrator guide (5697-0014, November 2009)

158 Installing and maintaining firmware
IMPORTANT: At the time of this document’s release, HP does not support the FC4-16IP blade. Consult
http://www.hp.com
for the latest, updated information.
.
switch:admin> firmwaredownload
Server Name or IP Address: 10.1.2.3
FTP User Name: JaneDoe
File Name: /pub/v5.2.x
FTP Password: xxxx
Verifying the input parameters ...
Checking system settings for firmwaredownload...
The following AP blades are installed in the system.
Slot Name Versions Traffic Disrupted
-----------------------------------------------------------------
3 FC4-16IP v5.2.x_main_bld47 GigE
4 FR4-18i v5.2.x_main_bld47 None
10 FR4-18i v5.2.x_main_bld47 None
This command will update the firmware on both CPs and all AP blade(s)
above. If you want to update firmware on a single CP only,
please use -s option.
You can run firmwaredownloadstatus to get the status of this
command.
This command will cause a warm/non-disruptive boot on the active CP,
but will require that existing telnet, secure telnet or SSH sessions
be restarted.
Do you want to continue [Y]: y