HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

88 Using the FC-FC Routing service
Viewing and configuring EX_Port information
The EX_Ports tab (see Figure 33) displays the EX_Ports, including configuration and status information. You
can also view this information from the Ports page.
To configure the EX_Ports, use the same procedures described in ”Managing ports” on page 45, The
EX_Port tasks that are listed in the task bar are the same as those tasks described in ”Managing ports” on
page 45.
For more detailed information on a specific port, click the port name to display a drill-down page for that
port, as shown in Figure 4 on page 18. The name of the port is listed at the top of the page and is also
indicated in the port diagram. The port drill-down page has several tabs that display additional
information about the port.
You can perform port management tasks for a single port from the port drill-down page. You can perform
these same tasks on multiple ports from the Ports or FC Routing pages. These pages allow you to select
multiple ports, for example, if you want to configure multiple ports at the same time.
Figure 33 FC Routing page with EX_Ports tab selected