HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

Advanced Web Tools 7.4.x administrator guide 77
6. Select the load sharing option:
• Select Dynamic Load Sharing to enable DLS.
•Clear Dynamic Load Sharing to disable DLS.
7. Click OK.
Viewing FSPF routes
The FSPF Routes pane displays the FSPF routes (see Figure 27) and the following information about each
route:
In Port Name The name of the port from which a frame comes.
In Port# The number of the port from which a frame comes.
Destination Domain The destination domain of the incoming frame.
Out Port Name The name of the port to which an incoming frame is forwarded to reach the
destination domain.
Out Port# The number of the port to which the incoming frame is forwarded to reach the
destination domain.
Metric The cost of reaching the destination domain (the sum of the costs of all the ISLs
traversed by the path).
# Hops The maximum number of hops to reach the destination domain.
Flags Specifies whether this route is dynamic or static. A dynamic route is discovered
automatically by the FSPF path-selection protocol. A static route is assigned from
the Static Routes tab.
Next Domain The domain of the next hop, which is the domain ID of the switch to which the Out
Port is connected.
Next Port The port number of the next hop, which is the port number on the switch to which
the Out Port is connected.