HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

72 Using the event log
Viewing the event log
You can view all the events in the event log or you can limit the events that are displayed, based on certain
criteria, such as type, severity level, or time of occurrence. (The time of occurrence is based on the host
system time, not the switch time.) Use the following procedure to view the event log:
1. Access the Switch Manager.
2. Click Events in the navigation bar.
The Events page displays all the event messages in the event log, as shown in Figure 25.
3. Optional: Choose a value from the Select time to be shown for events drop-down list.
You can choose to display the switch time of the events, the local time of the events, or both.
Figure 25 Events page
Filtering the displayed events
An event must meet all selected criteria to be displayed in the table.
1. Access the Switch Manager.
2. Click Events in the navigation bar.
4 = Info Info messages report the current status of the system components other than error
status. For example, detecting on and off line status of a fabric port.
5 = Debug Debug messages are for debugging use only. They are produced by code inserted
by the vendor to inform the user that a suspected problem has occurred.
Table 3 Event message levels (continued)
Event level Description