HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

Advanced Web Tools 7.4.x administrator guide 67
Use the following procedure to clone a zone configuration:
1. From the Switch Explorer, click the Zone Administration icon in the fabric toolbar, or from the Switch
Manager, click Zoning in the navigation bar.
2. Click the Zone Configurations tab.
3. Select the zone configuration to clone.
4. Click Clone in the task bar.
5. Enter a name for the new zone configuration in the New name box of the Clone Zone Configuration
window.
6. Click OK.
The new zone configuration is created and is displayed in the Zone Configurations tab.
Renaming a zone configuration
You cannot rename the effective zone configuration. Use the following procedure to rename a zone
configuration:
1. From the Switch Explorer, click the Zone Administration icon in the fabric toolbar, or from the Switch
Manager, click Zoning in the navigation bar.
2. Click the Zone Configurations tab.
3. Select the zone configuration to rename.
4. Click Rename in the task bar.
5. Enter the new name for the zone configuration in the New name box of the Rename Zone
Configuration window.
6. Click OK.
The renamed zone configuration is displayed in the Zone Configurations tab.
Modifying a zone configuration
Modifying a zone configuration can involve the following tasks:
• Adding zones
• Removing zones
• Renaming the zone configuration
The following procedure includes all these tasks. You cannot modify the effective zone configuration.
1. From the Switch Explorer, click the Zone Administration icon in the fabric toolbar, or from the Switch
Manager, click Zoning in the navigation bar.
2. Click the Zone Configurations tab.
3. Click the name (hyperlink) of the zone configuration to modify.
The zone configuration drill-down page is displayed.
4. To add zones to the configuration:
a. Click Add Member in the Members task bar.
b. Select the zones to add to the zone configuration and click Add.
c. Verify that the Selected Zones list contains the correct members.
d. Click the Remove button to remove members if necessary.
e. Click OK.
5. To remove zones:
a. Select the zones to remove.
b. Select Remove Member in the Members task bar.
c. Click Yes in the confirmation window.