HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

Advanced Web Tools 7.4.x administrator guide 63
c. Click the Domain, Port tab, select the domains or ports, and click Add.
You can also enter a domain and port in the Any Domain and Port boxes and click Add.
The Domains in the Fabric area displays all the domains and ports that are available to be added
to the zone. As each domain or port is added, it disappears from the list of available domains and
ports and appears in the Members list.
d. Click the iSCSI Names tab, select names, and click Add iSCSI Name.
You can also enter an iSCSI name in the Any iSCSI Name box and click Add.
Only iSCSI initiators are displayed. Each iSCSI initiator has a WWN assigned to it. These WWNs
are not displayed in the WWNs tab, however.
You must configure a CHAP secret for the devices in the zone to establish communication. See
”Configuring CHAP” on page 100 for more information.
6. Verify that the Zone Members to be Added list contains the correct members.
7. Click the Remove button to remove members, if necessary.
8. Click OK.
The new zone is created and is displayed in the Zones tab.
Figure 23 New Zone dialog box
Cloning a zone
Cloning creates an exact duplicate of an existing zone and assigns a new name to the duplicate.
Cloning a zone is useful if you want to create a new zone that is similar to an existing zone. You can
create a copy of the existing zone and then edit the copy, rather than creating the new zone from scratch.
Use the following procedure to clone a zone: