HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

62 Managing zoning
Figure 22 Zoning page with Zones tab selected
Creating a zone
You can specify members of a zone using the following methods:
• Alias names
• WWNs (devices)
• Switch domain and port area number pairs, for example, 2, 20
• iSCSI names
Use the following procedure to create a zone:
1. From the Switch Explorer, click the Zone Administration icon in the fabric toolbar or from the Switch
Manager, click Zoning in the navigation bar.
2. Click the Zones tab.
3. Click New in the task bar.
The New Zone dialog box opens with the Aliases tab selected, as shown in Figure 23.
4. Enter a name for the zone in the Zone Name box.
5. Select the members to add to the zone:
a. Click the Aliases tab, select aliases, and click Add.
b. Click the WWNs tab, select WWNs, and click Add NWwn to add the node WWN, or click Add
PWwn to add the port WWN.
You can also enter a WWN in the Any WWN box and click Add.