HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

42 Managing the MP Router
Figure 16 Administration page with SNMP tab selected
Configuring SNMP information
1. Access the Switch Manager.
2. Click Administration in the navigation bar.
3. Click the SNMP tab.
4. Click the Edit button.
5. Enter the system name, description, contact, and location.
6. Enter the event trap level, which is an integer between 0 and 5, inclusive.
7. Click OK.
Adding a trap recipient
1. Access the Switch Manager.
2. Click Administration in the navigation bar.
3. Click the SNMP tab.
4. Click Add in the Trap Receiver Entries task bar.
5. Enter the IP address and community string of the trap recipient.
6. Click OK.