HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

Advanced Web Tools 7.4.x administrator guide 27
Displaying a list of domain IDs
Before assigning a domain ID to an MP Router, check the list of domain IDs already in the fabric so that
you do not assign a duplicate.
1. Access the Switch Manager.
2. Click Fabric in the navigation bar (see Figure 5 on page 22).
The fabric table lists all the domain IDs in the fabric.
Assigning a domain ID
To prevent a domain ID conflict, make sure all domain IDs are unique before connecting a switch to the
fabric. You can also disable the switch until it is connected to the fabric and then re-enable the switch
afterwards; unique domain IDs are automatically assigned.
The MP Router must be disabled before the domain ID is changed. If the MP Router is enabled, it is
automatically disabled before the domain ID is changed and then automatically enabled afterwards.
1. Access the Switch Manager.
2. Click Administration in the navigation bar.
3. Click the Switch Information tab (see Figure 8).
4. Click Change Domain Id in the task bar.
The Change Domain Id window opens.
5. Click Fabric Assigned to automatically assign a unique domain ID, or
click Custom to manually assign a domain ID.
6. If you clicked Custom in step 5, enter a domain ID.
The domain ID must be between 1 and 239 inclusive, and must be unique within the fabric.
7. Click OK.