HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

Advanced Web Tools 7.4.x administrator guide 25
Figure 7 Administration tab with Config Upload/Download tab selected
Restoring previous fabric configuration settings
This procedure restores the system configuration settings from a previously saved backup. The configuration
takes effect at the next reboot.
1. Access the Switch Manager.
2. Click Administration in the navigation bar.
3. Click the Config Upload/Download tab (see Figure 7).
4. Verify that the FTP service is running on the host workstation.
5. Click Download Configuration in the task bar.
6. Optional: Click Edit Server to make any changes to the configuration file and server.
The configuration file and configuration server are those listed on the Config Upload/Download pane.
7. Click OK to download the configuration file from the configuration server to the MP Router.
Resetting the fabric configuration settings
This procedure resets the fabric configuration settings to their default values. All system parameters are
reset to defaults except the following:
• Ethernet MAC address
• IP address
• Subnetmask