HP StorageWorks Advanced Web Tools 7.4.X Administrator Guide (AA-RVHFC-TE, September 2005)

Advanced Web Tools 7.4.x administrator guide 101
Figure 42 Config iSCSI Initiator window
5. To add an iSCSI initiator, enter the name in the iSCSI Name box and enter the CHAP secret in the
CHAP Secret box.
To add or modify the CHAP secret of an existing iSCSI initiator, select the name from the table at the
top of the window, and enter the CHAP secret in the CHAP Secret box.
To delete the CHAP secret of an existing iSCSI initiator, select the name from the table at the top of the
window, and clear the CHAP secret in the CHAP Secret box.
Remember the shared secret. Configure the iSCSI host side when you configure the iSCSI driver on the
iSCSI host.
6. Click the Add/Update button.
7. Repeat step 5 and step 6 until you have finished configuring iSCSI initiators.
8. Click Close.
Configuring iSCSI targets and CHAP secrets
1. Access the Switch Manager of the primary IP configuration server.
2. Click iSCSI Gateway in the navigation bar.
3. Click the iSCSI Devices tab. (See Figure 41 on page 99.)
4. Click Configure Target in the task bar.
The Config iSCSI Target window opens. (This window is similar to the Config iSCSI Initiator window,
shown in Figure 42.)
5. To add an iSCSI target, enter the name in the iSCSI Name box and enter the CHAP secret in the CHAP
Secret box.
To add or modify the CHAP secret of an existing iSCSI target, select the name from the table at the top
of the window and enter the CHAP secret in the CHAP Secret box.
To delete the CHAP secret of an existing iSCSI target, select the name from the table at the top of the
window and clear the CHAP secret in the CHAP Secret box.
Remember the shared secret. Configure the iSCSI host side when you configure the iSCSI driver on the
iSCSI host.