Brocade OS Command Reference Manual Supporting Fabric OS v6.0.0 (53-1000599-01, October 2007)

Fabric OS Command Reference 563

53-1000599-01

secPolicySave

Saves a defined security policy to persistent memory.

Synopsis secpolicysave

Description Use this command to save a defined security policy to persistent memory. Secpolicysave saves the

modified SCC, DCC, and FCS policies to the Defined Security Policy Set on the local switch.

This command is always a local switch operation. A fabric-wide consistency configuration does not

affect the behavior of this command.

Operands none

Example To save defined policy set to persistent memory:

switch:admin> secpolicysave

secpolicysave command was completed successfully.

See Also fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete,

secPolicyDump, secPolicyRemove, secStatsShow