Brocade Fabric Watch Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000438-01, June 2007)

Fabric Watch Administrator’s Guide 77
53-0000438-01
SFP class
SFP class
Table 29 provides default settings for areas in the SFP class.
NOTE
SFPs connected to GbE ports are not monitored.
SES Violations Monitors SES
violations
Unit: Violation(s)
Time Base: minute
Low: 1
High: 2
Buffer: 0
Changed: 0
Below: 0
Above: 3
In-Between: 0
Informative
Informative
Out_of_range
In_range
SLAP Bad Packets Monitors SLAP bad
packets
Unit: Violation(s)
Time Base: minute
Low: 1
High: 2
Buffer: 0
Changed: 0
Below: 0
Above: 3
In-Between: 0
Informative
Informative
Out_of_range
In_range
SLAP Failures Monitors SLAP
failures
Unit: Violation(s)
Time Base: minute
Low: 1
High: 2
Buffer: 0
Changed: 0
Below: 0
Above: 3
In-Between: 0
Informative
Informative
Out_of_range
In_range
Telnet Violations Monitors telnet
violations
Unit: Violation(s)
Time Base: minute
Low: 1
High: 2
Buffer: 0
Changed: 0
Below: 0
Above: 3
In-Between: 0
Informative
Informative
Out_of_range
In_range
TS Out of Sync Monitors instances in
which the timestamp
is out of sync
Unit: Violation(s)
Time Base: minute
Low: 1
High: 2
Buffer: 0
Changed: 0
Below: 0
Above: 3
In-Between: 0
Informative
Informative
Out_of_range
In_range
WSNMP Violations Monitors WSNMP
violations
Unit: Violation(s)
Time Base: minute
Low: 1
High: 2
Buffer: 0
Changed: 0
Below: 0
Above: 3
In-Between: 0
Informative
Informative
Out_of_range
In_range
TABLE 28 Security class threshold defaults (Continued)
Area Description Default threshold
settings
Default alarm
settings
Threshold state